PART NUMBER: IREGN-RR580

DESCRIPTION:
NISMO ADJUSTABLE FUEL REGULATOR. FITS MOST O-RING TYPE FUEL RAILS

FITS: 240SX, ALTIMA, G20, I30, MAXIMA, SENTRA, PULSAR GTIR, 200SX, NX2000,

PART CATEGORY:
FUEL INJECTION PARTS

ENGINES: GA16DE, KA24DE DUAL CAM, KA24E SINGLE CAM, SR20DE, SR20DE W/ROLLER CAM, SR20DE(T) GTIR, SR20DET,

PART NUMBER: IREGN-RR710

DESCRIPTION:
FUEL REG. ADJ. BARBED IN AND OUT

FITS: 280ZXT, 300ZX (Z31), 300ZX (Z32),

PART CATEGORY:
FUEL INJECTION PARTS

ENGINES: L28ET, VG30DE, VG30DETT, RB20,25,26 DE(T),

PART NUMBER: IRES6-6OHMS

DESCRIPTION:
DROPPING RESISTOR - 6.8 OHM/10 WATT - USE WHEN REPLACING HIGH IMPEDANCE (11-14 OHMS) INJECTORS WITH LOW IMPEDANCE (2-4 OHMS)...

FITS: 240SX, 280ZXT, 300ZX (Z31), ENGINE SPECIFIC, G20, SENTRA, PULSAR GTIR, 200SX, NX2000,

PART CATEGORY:
FUEL INJECTION PARTS

ENGINES: KA24DE DUAL CAM, KA24E SINGLE CAM, L28ET, SR20DE, SR20DE W/ROLLER CAM, SR20DE(T) GTIR, SR20DET, VG30ET, RB20,25,26 DE(T),

PART NUMBER: IZ314-49000

DESCRIPTION:
INJECTOR Z31 490CC MIN @ 2.5 BAR (36 PSI), 2.5 OHM HOSE END TYPE, MUST USE IRES6-6OHMS RESISTORS WHEN REPLACING HIGH IMPEDANCE...

FITS: 280ZXT, 300ZX (Z31), ENGINE SPECIFIC, MAXIMA,

PART CATEGORY:
FUEL INJECTION PARTS

ENGINES: L28ET, VG30E, VG30ET,

PART NUMBER: IZ320-ADAPT

DESCRIPTION:
Z32 FUEL RAIL INSULATOR SUPPORT WHEN LATE FUEL RAIL IS USED (SET OF 6 QTY)

FITS: 300ZX (Z32), J30,

PART CATEGORY:
FUEL INJECTION PARTS

ENGINES: VG30DE, VG30DETT,

PART NUMBER: IZ320-L2EAD

DESCRIPTION:
Z32 LATE STYLE INJECTOR TO EARLY FUEL RAIL ADAPTER KIT

FITS: 300ZX (Z32),

PART CATEGORY:
FUEL INJECTION PARTS

ENGINES: VG30DE, VG30DETT,

PART NUMBER: IZ333-1KCCM

DESCRIPTION:
INJECTOR Z33 1000CC MIN @3.5 BAR WITH O-RINGS, ADAPTER, HARNESS CONNECTOR, SOLD AS EACH

FITS: 350Z, TRUCK, XTERRA, G35, ALTIMA 2002+, SENTRA 2.5L, MAXIMA 2002+, MURANO, FX35, TITAN, G37, FRONTIER, FX45, G37, M35, M45, GTR, ROGUE, 370Z, ARMADA, QX56, I35,

PART CATEGORY:
FUEL INJECTION PARTS

ENGINES: QR25DE, VQ35DE, VQ35DE REV-UP, VK56, VQ35HR, VQ37, VQ40, VQ37VHR, VK45,

PART NUMBER: IZ333-55500

DESCRIPTION:
For high boost - 555cc/min @ 3.5bar Ultra fine spray multi-hole directional flow injectors, feature the highest dynamic range of...

FITS: 350Z, MAXIMA, G35, ALTIMA 2002+, SENTRA 2.5L, MAXIMA 2002+, MURANO, FX35, TITAN,

PART CATEGORY:
FUEL INJECTION PARTS

ENGINES: QR25DE, VQ35DE, VQ35DE REV-UP, VQ35HR,

PART NUMBER: IZ333-60000

DESCRIPTION:
INJECTOR Z33 600CC @3.5 BAR 555CC @3 BAR, CLOCKING MIGHT CHANGE DEPENDING ON FITMENT FITS VQ35DE, QR25DE, VK56DE FUEL RAILS

FITS: 350Z, MAXIMA, G35, ALTIMA 2002+, SENTRA 2.5L, MAXIMA 2002+, MURANO, FX35, TITAN,

PART CATEGORY:
FUEL INJECTION PARTS

ENGINES: QR25DE, VQ35DE, VQ35DE REV-UP, VQ35HR,

PART NUMBER: IZ333-FMUKT

DESCRIPTION:
FMU FUEL CONTROL KIT FITS 03-08 G35-350Z

FITS: 350Z, G35,

PART CATEGORY:
FUEL INJECTION PARTS

ENGINES: VQ35DE, VQ35DE REV-UP,

PART NUMBER: L2409-6SPD4

DESCRIPTION:
FLYWHEEL 89+ 240SX FOR USE WITH JWT 6 SPEED ADAPTER ONLY, ALUMINUM, ALSO FITS RB SERIES ENGINES, 13.8 LBS, FITS 240MM AND 250MM...

FITS: 240SX,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: KA24DE DUAL CAM, KA24E SINGLE CAM, RB20,25,26 DE(T),

PART NUMBER: L2409-ND1MD

DESCRIPTION:
C/DISC 89+240SX METAL 1 SIDE (DISC ONLY), ALSO FITS 93-01 ALTIMA, 70-73 240Z

FITS: 240SX, ALTIMA,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: KA24DE DUAL CAM, KA24E SINGLE CAM,

PART NUMBER: L2409-NDSTD

DESCRIPTION:
C/DISC ORGANIC 225MM FITS ALL 240SX, 93-01 ALTIMA, ALSO FITS 70-73 240Z

FITS: 240SX, ALTIMA,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: KA24DE DUAL CAM, KA24E SINGLE CAM,

PART NUMBER: L2409-NP000

DESCRIPTION:
PRESSURE PLATE 750KG, 225MM, 89+ 240SX HI-PERF (PRESSURE PLATE ONLY), ALSO FITS 93-01 ALTIMA

FITS: 240SX, ALTIMA,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: KA24DE DUAL CAM, KA24E SINGLE CAM,

PART NUMBER: L3503-FPLAT

DESCRIPTION:
FRICTION PLATE KIT FOR JWT VQ35 FLYWHEELS. THIS KIT REPLACES THE WEARING SURFACE OF YOUR JWT FLYWHEEL. 250MM DIA, 10" OD, 6" ID, BOLTS...

FITS: 240SX, 280ZXT, 300ZX (Z32), 350Z, ALTIMA, ENGINE SPECIFIC, MAXIMA, SENTRA, G35, ALTIMA 2002+, SENTRA 2.5L, MAXIMA 2002+, G37, G37, 370Z,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: KA24DE DUAL CAM, KA24E SINGLE CAM, L28ET, QR25DE, VG30DE, VG30DETT, VQ35DE, VQ35DE REV-UP, RB20,25,26 DE(T), VQ35HR, VQ37, VQ37VHR,

PART NUMBER: L3503-NC000

DESCRIPTION:
350Z / G35 HIGH CLAMPING FORCE CLUTCH SET. 1200KG CLAMPING FORCE AND A SMOOTH ENGAGEMENT ORGANIC DISC MATERIAL AND HD SPRUNG HUB...

FITS: 240SX, 280ZXT, 300ZX (Z32), 350Z, ALTIMA, ENGINE SPECIFIC, MAXIMA, G35, ALTIMA 2002+, SENTRA 2.5L, MAXIMA 2002+, I35,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: KA24DE DUAL CAM, KA24E SINGLE CAM, L28ET, QR25DE, SR20DET, VQ35DE, VQ35DE REV-UP, RB20,25,26 DE(T),

PART NUMBER: L3503-NCFSD

DESCRIPTION:
FLYWHEEL & CLUTCH KIT 350Z / G35, NODULAR IRON, 26 LB FLYWHEEL, 900KG CLUTCH / DISC / TO BEARING & PILOT BUSHING, 2003-2006 VQ35DE...

FITS: 350Z, G35,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: VQ35DE,

PART NUMBER: L3503-NF000

DESCRIPTION:
JWT 350Z / G35 low inertia flywheel weighs in at 14lbs. Cutting the weight of the stock dual mass unit in half makes this engine...

FITS: 350Z, G35,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: VQ35DE, VQ35DE REV-UP,

PART NUMBER: L3503-NFSDE

DESCRIPTION:
FLYWHEEL 2003-2006 350Z / G35, NODULAR IRON, 26 LB, NON-HR ONLY

FITS: 350Z, G35,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: VQ35DE, VQ35DE REV-UP,

PART NUMBER: L3507-CSC00

DESCRIPTION:
JWT has designed a new direct fit C.S.C. that addresses both issues with the O.E. cylinder by incorporating an all-aluminum piston /...

FITS: 350Z, G35, G37, G37, 370Z,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: VQ35HR, VQ37, VQ37VHR,

PART NUMBER: L3507-CSCM1

DESCRIPTION:
FOR USE WITH JWT CSC: Due to the many combinations of clutches, flywheels, & bellhousings, this hardware is a starter kit that...

FITS: ALL

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: KA24DE DUAL CAM, KA24E SINGLE CAM, L28ET, SR20DE, SR20DET, VG30DE, VG30DETT, SR20VE (VVL), RB20,25,26 DE(T),

PART NUMBER: L3507-NCFSH

DESCRIPTION:
FLYWHEEL & CLUTCH KIT HR / VHR, NODULAR IRON, 26 LB FLYWHEEL, 900KG CLUTCH / DISC / PILOT BUSHING, 2007+ VQ35HR / VQ37VHR ONLY (2...

FITS: 350Z, G35, G37, G37, 370Z,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: VQ35HR, VQ37, VQ37VHR,

PART NUMBER: L3507-NCHR0

DESCRIPTION:
JWT HD CLUTCH '07+ 350Z / 370Z / G35 / G37 W/HR ENGINE (2 THROTTLES) HIGH CLAMPING FORCE CLUTCH SET. 1200KG CLAMPING FORCE AND A...

FITS: 350Z, G35, G37, G37, 370Z,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: VQ35HR, VQ37, VQ37VHR,

PART NUMBER: L3507-NFHR0

DESCRIPTION:
JWT Flywheel '07+ 350Z / 370Z / G35 / G37 w/HR engines (2 throttles). This low inertia flywheel weighs in at only 15.4lbs. Cutting...

FITS: 350Z, G35, G37, G37, 370Z,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: VQ35HR, VQ37, VQ37VHR,

PART NUMBER: L3507-NFSHR

DESCRIPTION:
FLYWHEEL HR 350Z / G35 / 370Z / G37, NODULAR IRON, 26 LB, VQ35HR / VQ35VHR 07+ (2 THROTTLES) ONLY

FITS: 350Z, G35, G37, G37, 370Z,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: VQ35HR, VQ37, VQ37VHR,

PART NUMBER: L6SPD-KA240

DESCRIPTION:
ADAPTER KIT TO USE Z33 TRANSMISSION ON KA24, RB SERIES, L-SERIES AND VG30DE(TT) ENGINES, USE WITH JWT 6 SPEED FLYWHEEL ONLY

FITS: 240SX, 280ZXT, 300ZX (Z32),

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: KA24DE DUAL CAM, KA24E SINGLE CAM, L28ET, VG30DE, VG30DETT, RB20,25,26 DE(T),

PART NUMBER: L6SPD-SRRWD

DESCRIPTION:
ADAPTER KIT TO USE Z33 TRANS ON SR20 RWD ENGINE, USE JWT 6 SPEED FLYWHEEL ONLY

FITS: 240SX, ENGINE SPECIFIC,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: SR20DE, SR20DET, SR20VE (VVL),

PART NUMBER: LALT2-NF000

DESCRIPTION:
JWT has just released the new V6 Altima / Maxima aluminum flywheel weighing in at 15 lbs. Cutting the weight of the stock dual mass...

FITS: ALTIMA, MAXIMA, ALTIMA 2002+, MAXIMA 2002+,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: VQ35DE,

PART NUMBER: LALT7-NC000

DESCRIPTION:
CLUTCH 2007-2012 ALTIMA VQ35 250MM DIAMETER 900KG CLAMPING FORCE HD COVER/DISC, FITS JWT AND OEM FLYWHEEL

FITS: ALTIMA, ALTIMA 2002+,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: VQ35DE,

PART NUMBER: LALT7-NDSTD

DESCRIPTION:
C/DISC ORGANIC 250MM (DISC ONLY), SPRUNG HUB DESIGN, FITS 07-12 ALTIMA V6, USE WITH JWT 1200KG PRESSURE PLATE OR JWT 900KG PRESSURE...

FITS: ALTIMA, ALTIMA 2002+,

PART CATEGORY:
CLUTCHES & FLYWHEELS

ENGINES: VQ35DE,